A compact radiator format suited to cases with a single 120mm mounting position.
1/10
OPCBLEU // PRODUCT
Product description
Description and product details Overview, features, specifications, compatibility and FAQ
120MM AIO. SP120 RGB ELITE. 24 ADDRESSABLE RGB LEDS.
Corsair iCUE H60x RGB ELITE 120mm Liquid CPU Cooler — Black
The Corsair iCUE H60x RGB ELITE is a compact all-in-one liquid CPU cooler designed for modern Intel and AMD desktop processors. A thermally optimized copper cold plate transfers heat into a 120mm aluminum radiator, while the included SP120 RGB ELITE PWM fan uses AirGuide technology to direct airflow through the radiator.
The pump head contains 16 individually addressable RGB LEDs, while the fan adds eight more for a total of 24 lighting zones. Connect the lighting directly to a compatible standard 5V motherboard ARGB header, or add a compatible Corsair iCUE lighting controller for expanded software control and synchronization.
120mm
Compact liquid-cooling radiator
47.73 CFM
Maximum listed fan airflow
24 RGB LEDs
Pump head and fan combined
The SP120 RGB ELITE fan uses PWM control to balance airflow and acoustics.
Sixteen LEDs illuminate the pump head and eight illuminate the included fan.
Corsair provides long-term manufacturer coverage subject to its warranty terms.
Compact Liquid Cooling
Efficient Cooling in a Single-Fan 120mm Format
The H60x RGB ELITE combines a copper cold plate, low-profile pump head, aluminum radiator, and one PWM fan in a sealed, ready-to-install liquid-cooling system.
Thermally Optimized Copper Cold Plate
The copper contact surface transfers heat away from the processor into the cooler’s liquid loop.
120mm Aluminum Radiator
The compact radiator dissipates heat through a common 120mm case-mounting position.
SP120 RGB ELITE AirGuide Fan
Anti-vortex vanes help direct concentrated airflow through the radiator rather than allowing air to spread outward.
Factory-Sealed AIO Design
The closed-loop cooler arrives assembled and does not require filling, draining, or routine coolant maintenance.
SP120 RGB ELITE Performance
PWM Control with AirGuide Technology
The included 120 × 25mm fan is rated up to 1,500 RPM and provides a listed balance of airflow, static pressure, and low-noise operation for radiator cooling.
PWM Fan Control
Connect the four-pin fan cable to a compatible motherboard header for automatic speed adjustment based on temperature.
16.91–47.73 CFM Airflow
The listed airflow range supports quieter low-load operation and stronger radiator airflow under load.
0.28–1.46mm H₂O Static Pressure
Static pressure helps the fan push air through the radiator’s restrictive fin structure.
7–28 dBA Listed Noise Range
Acoustic output varies with fan speed, installation, case airflow, and system configuration.
RGB the Easy Way
Twenty-Four Individually Addressable LEDs
Lighting can be connected directly to a compatible motherboard’s standard 5V three-pin ARGB header without requiring a dedicated Corsair controller.
Sixteen Pump-Head LEDs
The illuminated pump cap creates a bright centerpiece around the processor socket.
Eight Fan LEDs
The SP120 RGB ELITE fan adds individually addressable lighting around the radiator position.
Standard 5V ARGB Connection
Use a compatible three-pin 5V addressable-RGB motherboard header; never connect the lighting cable to a four-pin 12V RGB header.
Optional Corsair iCUE Expansion
Advanced iCUE synchronization requires a compatible Corsair lighting controller, sold separately.
Broad Socket Support
Compatible with Modern Intel and AMD Platforms
The included modular mounting hardware supports mainstream Intel and AMD desktop sockets, with pre-applied thermal paste for a cleaner first installation.
Intel LGA 1700 and 1200
Supports compatible Intel desktop processors using the included mounting hardware.
Intel LGA 115x
Compatible with LGA 1150, 1151, 1155, and 1156 mounting patterns.
AMD AM5 and AM4
Supports compatible Ryzen desktop processors on current and previous-generation AMD platforms.
Intel LGA 2066 Hardware
Corsair’s official compatibility overview and quick-start guide include mounting hardware for LGA 2066 systems.
Effortless Installation
Tool-Free Modular Brackets and Pre-Applied Thermal Paste
The cooler is designed to simplify installation for first-time builders while still providing the mounting flexibility needed for a range of case layouts.
Modular Mounting Bracket
The pump bracket can be configured for the supported Intel or AMD socket family.
Pre-Applied Thermal Compound
Factory-applied thermal paste eliminates the need to measure or spread compound during the first installation.
Check Case Radiator Clearance
Confirm a free 120mm fan mount, radiator thickness allowance, tube routing, and motherboard-component clearance.
Plan the Radiator Orientation
Follow the case and cooler manuals when choosing rear, top, or front placement and ensure the tubes are not sharply bent.
Complete Cooling Feature Set
Key Features
A compact liquid-cooling loop, copper cold plate, 120mm radiator, PWM fan, addressable RGB lighting, broad socket support, and straightforward installation hardware.
120mm All-in-One Liquid CPU Cooler
Thermally Optimized Copper Cold Plate
Aluminum Radiator Construction
One SP120 RGB ELITE 120mm Fan Included
120 × 25mm Fan Dimensions
PWM Fan-Speed Control
Up to 1,500 RPM ±10%
16.91–47.73 CFM Listed Airflow
0.28–1.46mm H₂O Static Pressure
7–28 dBA Listed Noise Range
AirGuide Anti-Vortex Fan Vanes
Sixteen Addressable RGB LEDs on Pump Head
Eight Addressable RGB LEDs on Fan
Standard Three-Pin 5V ARGB Control
Optional Corsair iCUE Controller Support
Modular Tool-Free Mounting Bracket
Pre-Applied Thermal Paste
AMD AM5 and AM4 Socket Support
Intel LGA 1700 and 1200 Socket Support
Intel LGA 1150 / 1151 / 1155 / 1156 Support
Intel LGA 2066 Mounting Support
Black Finish
Five-Year Limited Manufacturer Warranty
Compatibility Overview
Supported CPU Socket Families
Confirm that the selected case has a suitable 120mm radiator position and that the motherboard socket, mounting hardware, and surrounding components match the cooler’s requirements.
| AMD | AM5, AM4 |
| Intel Mainstream | LGA 1700, 1200, 1156, 1155, 1151, 1150 |
| Intel High-End Desktop | LGA 2066 according to Corsair’s official compatibility overview and quick-start guide |
| Radiator Mount Requirement | One compatible 120mm case-fan position with sufficient radiator, fan, and tube clearance |
| RGB Header Requirement | Compatible three-pin 5V ARGB motherboard header, or supported Corsair lighting controller sold separately |
Installation Planning
Check the Case, Headers, and Radiator Position
A successful installation requires both mechanical clearance and the correct motherboard connections for the fan, pump, and lighting system.
Confirm a 120mm Mount
Measure the rear, top, or front mounting area and check for interference from RAM, motherboard heatsinks, and the graphics card.
Identify the Required Headers
Use the motherboard manual to locate the CPU-fan, pump or system-fan, and three-pin 5V ARGB headers.
Do Not Use a 12V RGB Header
Connecting a 5V addressable-RGB device to a four-pin 12V RGB header can damage the lighting hardware.
Prepare the CPU Surface
Remove protective film from the cold plate and clean old thermal compound before mounting the cooler.
Official Documentation
Quick-Start Guide and Compliance Documents
Use Corsair’s official documentation for the exact mounting sequence, cable routing, supported hardware, and safety information.
H60x / H100x RGB ELITE Quick-Start Guide
EU Declaration of Conformity
UKCA Declaration of Conformity
Five-Year Warranty
Retain the purchase receipt and follow Corsair’s regional warranty requirements for service eligibility.
Designed for Compact Cooling Builds
Perfect For
Ideal for compatible gaming PCs, mainstream desktops, compact cases with one 120mm radiator position, first-time liquid-cooling builds, and systems that benefit from motherboard-controlled RGB.
Liquid Cooling without a Large Radiator
The single-fan format fits cases that cannot accommodate larger 240mm or 360mm radiators.
Simple Mounting and Pre-Applied Paste
The modular bracket and factory-applied thermal compound simplify the initial installation.
Standard 5V ARGB Integration
Synchronize the lighting through a compatible motherboard without buying a dedicated controller.
Detailed Cooling Hardware
Technical Specifications
Verified specifications for radiator size, materials, fan performance, RGB lighting, dimensions, socket compatibility, installation features, weight, and warranty.
| Brand | Corsair |
| Product Model | iCUE H60x RGB ELITE |
| Manufacturer Part Number | CW-9060064-WW2 |
| Product Type | All-in-One Liquid CPU Cooler |
| Color | Black |
| Radiator Class | 120mm |
| Radiator Material | Aluminum |
| Cold Plate Material | Thermally optimized copper |
| Number of Included Fans | 1 |
| Included Fan | Corsair SP120 RGB ELITE Series |
| Fan Dimensions | 120 × 120 × 25mm |
| Fan Control Method | Four-pin PWM |
| Maximum Rated Fan Speed | 1,500 RPM ±10% |
| Listed Fan Airflow | 16.91–47.73 CFM |
| Listed Static Pressure | 0.28–1.46mm H₂O |
| Listed Noise Level | 7–28 dBA |
| Fan Airflow Technology | AirGuide anti-vortex vanes |
| Pump-Head Lighting | 16 individually addressable RGB LEDs |
| Fan Lighting | 8 individually addressable RGB LEDs |
| Total Addressable LEDs | 24 |
| Standard RGB Control | Compatible three-pin 5V motherboard ARGB header |
| Corsair iCUE Control | Requires a compatible Corsair lighting controller, sold separately |
| AMD Socket Support | AM5, AM4 |
| Intel Socket Support | LGA 1700, 1200, 1156, 1155, 1151, 1150; official overview and guide also include LGA 2066 |
| Mounting System | Modular tool-free mounting bracket |
| Thermal Compound | Pre-applied |
| Listed Product Length | 156mm / approximately 6.1 in |
| Listed Product Width | 120mm / approximately 4.7 in |
| Listed Product Height | 108mm / approximately 4.3 in |
| Listed Product Weight | 1.32kg / approximately 2.9 lb |
| Package Contents | H60x RGB ELITE liquid CPU cooler, SP120 RGB ELITE fan, Intel and AMD mounting hardware, cables, and pre-applied thermal compound |
| Manufacturer Warranty | 5-year limited warranty, subject to Corsair’s terms |
Shop With Confidence
Why Buy From OPCBleu?
OPCBleu combines carefully selected technology products with transparent service, Canadian delivery, and a customer-first buying experience.
Compact Liquid Cooling with Brilliant RGB Lighting.
The Corsair iCUE H60x RGB ELITE combines a copper cold plate, 120mm aluminum radiator, SP120 RGB ELITE PWM fan, 24 addressable LEDs, standard motherboard ARGB control, and broad Intel and AMD socket support.
OPCBleu focuses on performance, reliability, and value so Canadian customers can shop for PC hardware with confidence.
🚚
Fast Canadian Shipping
Quick order processing and delivery across Canada.
🛡️
30-Day Returns
A clear return process for eligible purchases.
🔒
Secure Checkout
Protected payment processing through trusted providers.
💙
Quebec-Based Store
Technology enthusiasts serving customers across Canada.
Helpful Answers
FAQs
Answers to common questions about the exact model, radiator size, socket compatibility, lighting control, iCUE support, fan performance, installation, and warranty coverage.
What is the exact model number?
This is the current iCUE H60x RGB ELITE 120mm revision with manufacturer part number CW-9060064-WW2.
Which CPU sockets are supported?
Corsair lists AMD AM5 and AM4, along with Intel LGA 1700, 1200, and the LGA 115x family. Corsair’s compatibility overview and quick-start guide also include LGA 2066 mounting hardware.
How large is the radiator?
The cooler uses a single-fan 120mm radiator. Confirm the case has a compatible 120mm position with adequate radiator, fan, tube, and motherboard clearance.
Which fan is included?
One Corsair SP120 RGB ELITE 120 × 25mm PWM fan is included. It is rated up to 1,500 RPM ±10% with listed airflow up to 47.73 CFM.
How is the RGB lighting controlled?
Connect the cooler’s addressable lighting to a compatible three-pin 5V motherboard ARGB header. Do not connect it to a four-pin 12V RGB header.
Does it work directly with Corsair iCUE?
Motherboard ARGB control does not require iCUE. Advanced Corsair iCUE lighting control requires a compatible Corsair lighting controller, sold separately.
How many RGB LEDs are included?
The pump head has 16 individually addressable LEDs, and the included fan has eight, for a total of 24.
Is thermal paste included?
Yes. Thermal compound is pre-applied to the copper cold plate for the first installation.
Does the cooler require coolant maintenance?
No routine filling or draining is required. It is a factory-sealed all-in-one liquid cooler.
Is a 120mm AIO suitable for every processor?
Cooling results depend on processor power, boost behavior, ambient temperature, case airflow, fan curves, mounting pressure, and workload. Confirm the processor and case requirements before purchase.
What warranty is included?
Corsair provides a five-year limited manufacturer warranty, subject to its current regional warranty terms.
1/10
